top of page
Search

How to read your survey report and prioritise repairs

Writer: Patrick Harley-Blake MRICS
Patrick Harley-Blake MRICS
Nov 3
6 min read

Your survey report arrives, it runs to dozens of pages, and most people head straight for the photos. That's understandable, but it's rarely the best way to make sense of what we found.


Our reports follow the RICS Home Survey format, so they're set out in lettered sections, each covering one part of the property. We've built our own templates on top of that format with one aim: to summarise what matters and help you decide what to do next. You get a summary up front, large photographs cross-referenced to the text, and a plain explanation of what each defect means for you.


This guide takes you through each section, shows how every element is written up, and explains how to use the report to put repairs in order. It applies to both RICS Home Survey Level 2 and Level 3 reports. Where something only appears in a Level 3, we say so.


Start with Section B: our overall opinion


Read Section B first. After Section A, which records the basics of the inspection itself, Section B is the summary of the whole report and the place where we tell you straight what we think of the property.


It brings together:

  • our overall opinion of the property

  • the condition rating for every element we inspected

  • our recommendations and the remedial works needed

  • in a Level 3 report, the repair costs, which you can add up to get an overall picture of the likely spend

  • any further investigations we advise


A condition rating is the number we give each part of the building to show how urgent it is. Condition rating 1 means no repair is currently needed. Condition rating 2 means repairs or replacement are needed, but the defect isn't considered serious or urgent. Condition rating 3 means a defect that is serious, or needs repairing, replacing or investigating urgently. NI means we weren't able to inspect that element.


Once you've read Section B, you know the shape of the report. When you reach the detail later, you already know which parts deserve the most attention.



Section C: the property as a whole


Section C gives you the background to the building before we get into its condition. It records the construction type and approximate age, the property's Energy Performance Certificate (EPC) rating, and the results of our desktop research into the local area.

That research includes coal mining and flood risk. Large parts of the areas we cover sit on former coalfield, so for many of the homes we survey this is worth knowing about early. A mining or flood note doesn't mean there's a problem with the house. It tells you, and your solicitor, what to look at more closely during the purchase.


Sections D to G: the building in detail


These four sections hold the bulk of the inspection. Each one is split into elements, such as the roof, the windows or the electrics, and each element carries its own condition rating.


Section D, outside the property. We assess the external condition: roof coverings and chimneys, gutters and downpipes, walls, windows and doors. This is where you'll find roofing defects, signs of leaking gutters, and any cracking or movement in the walls, with our view on what's causing it.


Section E, inside the property. Where it's safe to do so, we go into the roof void to look at the timbers, insulation and the underside of the roof covering. We also explain any dampness we find and, more importantly, what's causing it, because the right repair depends entirely on the cause. Where we see alterations, we comment on them against current Building Regulations. That isn't a formal Building Regulations inspection, but if something looks like it falls short, or your solicitor should check for approvals, we'll say so.


Section F, services. We look at the electrics, gas, water, heating and drainage. That includes spotting electrical alterations, checking for earth bonding at the gas meter and trying to locate the stop tap, which is worth knowing on day one in a new home. These are visual checks, not tests. Where we think a test by a qualified electrician or Gas Safe registered engineer is needed, it's in the report.


Section G, grounds. This covers garages, sheds, permanent outbuildings and the gardens. If we see Japanese knotweed, or something that could be, we advise you on what it means for the purchase and what to do next.


How each element is written up


Every element follows the same pattern, so once you've read one you can read them all. Here's how it works, using the rainwater goods (gutters and downpipes) from one of our reports, rated condition rating 2.


  1. Description. The start of each element tells you what it is and what it's made of. In this case, uPVC gutters and downpipes fixed to painted timber fascias at the roof eaves.


  2. Condition. Next we set out what we found. Here the gutters were generally working, but we noted stained sections, suspected leaking joints, loose sections, inadequate fixings and vegetation in the gutters. One downpipe discharged onto a flat roof, which puts extra strain on the roof covering and can shorten its life.


  3. Advisories. This is practical advice that goes beyond the defects. It wasn't raining on the day, so we couldn't confirm the system was watertight, and we recommended watching it during rainfall soon after you move in. We also pointed out that high-level work usually needs scaffolding, which can cost more than the repair itself, so it makes sense to group high-level jobs together.


  4. The summary box. At the end of every element you'll find three headings: Recommendations, Repair costs (Level 3 reports) and Further investigations. In this example the recommendations were to clear the gutters and test them with a hosepipe, repair the downpipe brackets and reseal the leaking joints.


  5. Photographs. Each section closes with photos and captions showing what we've described, such as the loose bracket, the suspected leaking joint and the downpipe discharging onto the flat roof.


If you're short on time, the summary box is the part to read. If you want to understand why we're recommending something, read the advisories.




Section H, issues for your legal advisers. This section is written for your solicitor or conveyancer, so send it to them. We flag things such as access rights, alterations that may have needed consent, and guarantees or warranties that should come with the property. We point out what needs checking; your solicitor confirms the legal position.


Section I, risks. Here we gather the risks we've identified in one place, split into risks to the building, risks to the grounds and risks to people. It's a quick way to see whether anything affects safety as well as cost.


Section J, energy. This section is included in Level 3 reports and gives further advice on the property's EPC. We comment on whether the EPC looks right for what we saw, along with insulation, ventilation and heating. Ventilation matters more than people expect: adding insulation without enough ventilation can lead to condensation problems later.


Putting repairs in order


The condition ratings do most of the prioritising for you. A sensible order looks like this:


  1. Condition rating 3 items and further investigations. Deal with these before you exchange contracts. Arrange any specialist reports we recommend and get contractor quotes, so you know the full picture while you can still discuss the price or reconsider.


  2. Condition rating 2 items. These need attention but aren't urgent. Plan them into your first year or two in the property.


  3. High-level work grouped together. If several jobs need scaffolding, such as gutters, chimney and roof repairs, doing them at the same time saves paying for access more than once.


  4. Advisories and maintenance. Many advisories are things to check after you move in, like watching the gutters in heavy rain. Add them to a simple maintenance list.


In a Level 3 report, the repair costs give you an indication of what the work is likely to cost. Use them as a guide, and get quotes from contractors before you rely on a figure. The Recommendations box for each element gives a contractor a clear starting point for that quote.


Questions about your report


A report is easier to act on once you've talked it through. Your surveyor calls you on the day of the inspection, before the report arrives, and we're happy to go through it with you afterwards at no extra cost. That includes questions that come up months later, once you've moved in and started on the work.


If you're buying and haven't booked your survey yet, you can find out more about our RICS Home Surveys




Call the office on 01226 885095, email admin@honeywellsd.com or visit honeywellsurveydesign.com.



 
 
 

Comments


bottom of page